A full-scale experimental set-up for assessing the energy performance of radiant wall and active chilled beam for cooling buildings

Research output: Contribution to journalJournal articleResearchpeer-review

7 Citations (Scopus)

Abstract

Full-scale experiments under both steady-state and dynamic conditions have been performed to compare the energy performance of a radiant wall and an active chilled beam. From these experiments, it has been observed that the radiant wall is a more secure and efficient way of removing heat from the test room than the active chilled beam. The energy saving, which can be estimated to around 10%, is due to increased ventilation losses. The asymmetry between air and radiant temperature, the air temperature gradient and the possible short-circuit between inlet and outlet play an equally important role in decreasing the cooling need of the radiant wall compared to the active chilled beam. It has also been observed that the type and repartition of heat load have an influence on the cooling demand. Regarding the comfort level, both terminals met the general requirements, except at high solar heat gains: overheating has been observed due to the absence of solar shading and the limited cooling capacity of the terminals. No local discomfort has been observed although some segments of the thermal manikin were slightly colder.
Original languageEnglish
JournalBuilding Simulation
Volume8
Issue number1
Pages (from-to)39-50
Number of pages12
ISSN1996-3599
DOIs
Publication statusPublished - 2015

Keywords

  • full-scale experiments
  • Cooling need
  • Terminal
  • Emitter
  • Radiant wall
  • Active chilled beam
  • Energy effectiveness
  • Air temperature stratification
  • Local comfort

Fingerprint Dive into the research topics of 'A full-scale experimental set-up for assessing the energy performance of radiant wall and active chilled beam for cooling buildings'. Together they form a unique fingerprint.

Cite this