Bremen Workshop : Run-Up: comparison between prototype measurements and laboratory measurements

Peter Frigaard, Jens Peter Kofoed, F. Schlütter, P. Troch, T. Versluys, B. van de Walle, M. Willems

Research output: Book/Report › Report › Research › peer-review

178 Downloads (Pure)

Abstract

The objective of the workshop was a comparison between the prototype and the laboratory measurements. the emphasis is put on comparison between recorded run-up levels. Three enclosed reports present measurements and results from University of Ghent (UG)/ FCCD, Flanders Hydraulics (FH) and Aalborg University, respectively. These three reports have served as basis for the comparisons carried out during the workshop.
Original languageEnglish
Place of PublicationAalborg
PublisherHydraulics & Coastal Engineering Laboratory, Department of Civil Engineering, Aalborg University
Number of pages31
Publication statusPublished - 1999

Bibliographical note

PDF for print: 100 pp.

MAST III; MAS3-CT97-0116

Keywords

  • Breakwaters
  • Run-Up
  • Wave Run-Up
  • Run-Up Signals
  • 2D Tests
  • 3D Tests
  • Tests
  • Water Tongue
  • Sea State Parameters

Access to Document

    Fingerprint Dive into the research topics of 'Bremen Workshop : Run-Up: comparison between prototype measurements and laboratory measurements'. Together they form a unique fingerprint.

    Cite this