I/O Standard Based Thermal/Energy Efficient Green Communication For Wi-Fi Protected Access on FPGA

Tanesh Kumar; Bishwajeet Pandey; Teerath Das; Dil Muhammad Akbar Hussain

doi:10.1109/ICUMT.2014.7002085

I/O Standard Based Thermal/Energy Efficient Green Communication For Wi-Fi Protected Access on FPGA

Tanesh Kumar, Bishwajeet Pandey, Teerath Das, Dil Muhammad Akbar Hussain

AAU Energy

Research output: Contribution to book/anthology/report/conference proceeding › Article in proceeding › Research › peer-review

10 Citations (Scopus)

Abstract

In this paper, we analyzed how does life and reliability of an integrated circuit is affected when it is operated in different regions under different temperatures. We have taken Fibonacci generator as our target circuit and LVCMOS as I/O standards. WPA and WPA2 (Wi-Fi Protected Access) key can be generated with Fibonacci generator. Here, thermal efficient green Fibonacci Generator is used to generate key for Wi-Fi Protected Access in order to make green communication possible under different room temperature. By analysis it is observed that at standard normal temperature (21degrees C), LVCMOS12 have 24%, 17.3% and 95.53% less junction temperature than LVCMOS25 at operating frequencies of 1 GHz, 10 GHz, and 100 GHz respectively, while at 1 THz, the junction temperature becomes 125 degrees C, which causes unreliability for circuit and device may not operate at that frequency. For world’s highest temperature (56.7 degrees C), we achieve 0.97% and 8.29% reduction in junction temperature at 1 GHz and 10 GHz operating frequencies respectively. This design is implemented in verilog on virtex-6 FGPA. Usually for functioning of a device, the junction temperature is below 125 degrees C.

Original language	English
Title of host publication	Proceedings of the 6th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops, ICUMT 2014
Number of pages	4
Publisher	IEEE Press
Publication date	6 Oct 2014
Pages	1191-1194
ISBN (Electronic)	978-1-4799-5291-5
DOIs	https://doi.org/10.1109/ICUMT.2014.7002085
Publication status	Published - 6 Oct 2014
Event	6th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops, ICUMT 2014 - St. Petersburg, Russian Federation Duration: 6 Oct 2014 → 8 Oct 2014

Conference

Conference	6th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops, ICUMT 2014
Country/Territory	Russian Federation
City	St. Petersburg
Period	06/10/2014 → 08/10/2014

Keywords

I/O standard
Thermal Analysis
LVCMOS
Power Optimized Design
I/Os Power
Fibonacci Generator
FPGA
C=Centigrade

Access to Document

10.1109/ICUMT.2014.7002085

AUB Link

Search for the material in Aalborg University Library's search engine

Cite this

@inproceedings{5ca9696da5c64ff5ae0e22076519e147,

title = "I/O Standard Based Thermal/Energy Efficient Green Communication For Wi-Fi Protected Access on FPGA",

abstract = "In this paper, we analyzed how does life and reliability of an integrated circuit is affected when it is operated in different regions under different temperatures. We have taken Fibonacci generator as our target circuit and LVCMOS as I/O standards. WPA and WPA2 (Wi-Fi Protected Access) key can be generated with Fibonacci generator. Here, thermal efficient green Fibonacci Generator is used to generate key for Wi-Fi Protected Access in order to make green communication possible under different room temperature. By analysis it is observed that at standard normal temperature (21degrees C), LVCMOS12 have 24%, 17.3% and 95.53% less junction temperature than LVCMOS25 at operating frequencies of 1 GHz, 10 GHz, and 100 GHz respectively, while at 1 THz, the junction temperature becomes 125 degrees C, which causes unreliability for circuit and device may not operate at that frequency. For world{\textquoteright}s highest temperature (56.7 degrees C), we achieve 0.97% and 8.29% reduction in junction temperature at 1 GHz and 10 GHz operating frequencies respectively. This design is implemented in verilog on virtex-6 FGPA. Usually for functioning of a device, the junction temperature is below 125 degrees C.",

keywords = "I/O standard, Thermal Analysis, LVCMOS, Power Optimized Design, I/Os Power, Fibonacci Generator, FPGA, C=Centigrade",

author = "Tanesh Kumar and Bishwajeet Pandey and Teerath Das and Hussain, {Dil Muhammad Akbar}",

year = "2014",

month = oct,

day = "6",

doi = "10.1109/ICUMT.2014.7002085",

language = "English",

pages = "1191--1194",

booktitle = "Proceedings of the 6th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops, ICUMT 2014",

publisher = "IEEE Press",

note = "6th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops, ICUMT 2014 ; Conference date: 06-10-2014 Through 08-10-2014",

}

Kumar, T, Pandey, B, Das, T & Hussain, DMA 2014, I/O Standard Based Thermal/Energy Efficient Green Communication For Wi-Fi Protected Access on FPGA. in Proceedings of the 6th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops, ICUMT 2014. IEEE Press, pp. 1191-1194, 6th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops, ICUMT 2014, St. Petersburg, Russian Federation, 06/10/2014. https://doi.org/10.1109/ICUMT.2014.7002085

I/O Standard Based Thermal/Energy Efficient Green Communication For Wi-Fi Protected Access on FPGA. / Kumar, Tanesh; Pandey, Bishwajeet; Das, Teerath et al.
Proceedings of the 6th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops, ICUMT 2014. IEEE Press, 2014. p. 1191-1194.

Research output: Contribution to book/anthology/report/conference proceeding › Article in proceeding › Research › peer-review

TY - GEN

T1 - I/O Standard Based Thermal/Energy Efficient Green Communication For Wi-Fi Protected Access on FPGA

AU - Kumar, Tanesh

AU - Pandey, Bishwajeet

AU - Das, Teerath

AU - Hussain, Dil Muhammad Akbar

PY - 2014/10/6

Y1 - 2014/10/6

N2 - In this paper, we analyzed how does life and reliability of an integrated circuit is affected when it is operated in different regions under different temperatures. We have taken Fibonacci generator as our target circuit and LVCMOS as I/O standards. WPA and WPA2 (Wi-Fi Protected Access) key can be generated with Fibonacci generator. Here, thermal efficient green Fibonacci Generator is used to generate key for Wi-Fi Protected Access in order to make green communication possible under different room temperature. By analysis it is observed that at standard normal temperature (21degrees C), LVCMOS12 have 24%, 17.3% and 95.53% less junction temperature than LVCMOS25 at operating frequencies of 1 GHz, 10 GHz, and 100 GHz respectively, while at 1 THz, the junction temperature becomes 125 degrees C, which causes unreliability for circuit and device may not operate at that frequency. For world’s highest temperature (56.7 degrees C), we achieve 0.97% and 8.29% reduction in junction temperature at 1 GHz and 10 GHz operating frequencies respectively. This design is implemented in verilog on virtex-6 FGPA. Usually for functioning of a device, the junction temperature is below 125 degrees C.

AB - In this paper, we analyzed how does life and reliability of an integrated circuit is affected when it is operated in different regions under different temperatures. We have taken Fibonacci generator as our target circuit and LVCMOS as I/O standards. WPA and WPA2 (Wi-Fi Protected Access) key can be generated with Fibonacci generator. Here, thermal efficient green Fibonacci Generator is used to generate key for Wi-Fi Protected Access in order to make green communication possible under different room temperature. By analysis it is observed that at standard normal temperature (21degrees C), LVCMOS12 have 24%, 17.3% and 95.53% less junction temperature than LVCMOS25 at operating frequencies of 1 GHz, 10 GHz, and 100 GHz respectively, while at 1 THz, the junction temperature becomes 125 degrees C, which causes unreliability for circuit and device may not operate at that frequency. For world’s highest temperature (56.7 degrees C), we achieve 0.97% and 8.29% reduction in junction temperature at 1 GHz and 10 GHz operating frequencies respectively. This design is implemented in verilog on virtex-6 FGPA. Usually for functioning of a device, the junction temperature is below 125 degrees C.

KW - I/O standard

KW - Thermal Analysis

KW - LVCMOS

KW - Power Optimized Design

KW - I/Os Power

KW - Fibonacci Generator

KW - FPGA

KW - C=Centigrade

U2 - 10.1109/ICUMT.2014.7002085

DO - 10.1109/ICUMT.2014.7002085

M3 - Article in proceeding

SP - 1191

EP - 1194

BT - Proceedings of the 6th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops, ICUMT 2014

PB - IEEE Press

T2 - 6th International Congress on Ultra Modern Telecommunications and Control Systems and Workshops, ICUMT 2014

Y2 - 6 October 2014 through 8 October 2014

ER -

I/O Standard Based Thermal/Energy Efficient Green Communication For Wi-Fi Protected Access on FPGA

Abstract

Conference

Keywords

Access to Document

AUB Link

Fingerprint

Cite this