Measurements for validation of high voltage underground cable modelling

Claus Leth Bak; Unnur Stella Gudmundsdottir; Wojciech Tomasz Wiechowski; Kim Søgaard; Martin Randrup Knardrupgård

Measurements for validation of high voltage underground cable modelling

Claus Leth Bak, Unnur Stella Gudmundsdottir, Wojciech Tomasz Wiechowski, Kim Søgaard, Martin Randrup Knardrupgård

AAU Energy

Research output: Contribution to book/anthology/report/conference proceeding › Article in proceeding › Research › peer-review

1100 Downloads (Pure)

Abstract

This paper discusses studies concerning cable modelling for long high voltage AC cable lines. In investigating the possibilities of using long cables instead of overhead lines, the simulation results must be trustworthy. Therefore a model validation is of great importance. This paper describes field test setups and measurements on an already installed cable line with several cross bonding points. These measurements are to be used for cable model validation, which are prepared using simulations. The proposed field tests should be used to validate the cable model for overvoltage problems. The verification shall be done both in the frequency domain and in the time domain.

Original language	English
Title of host publication	Proceedings of the International Conference on Power Systems Transients (IPST 2009)
Number of pages	7
Publication date	2009
Publication status	Published - 2009
Event	International Conference on Power Systems Transients (IPST 2009) - Kyoto, Japan Duration: 2 Jun 2009 → 6 Jul 2009

Conference

Conference	International Conference on Power Systems Transients (IPST 2009)
Country/Territory	Japan
City	Kyoto
Period	02/06/2009 → 06/07/2009

Access to Document

PublicationAccepted author manuscript, 517 KB

AUB Link

Search for the material in Aalborg University Library's search engine

Cite this

@inproceedings{065e668071db11de9240000ea68e967b,

title = "Measurements for validation of high voltage underground cable modelling",

abstract = "This paper discusses studies concerning cable modelling for long high voltage AC cable lines. In investigating the possibilities of using long cables instead of overhead lines, the simulation results must be trustworthy. Therefore a model validation is of great importance. This paper describes field test setups and measurements on an already installed cable line with several cross bonding points. These measurements are to be used for cable model validation, which are prepared using simulations. The proposed field tests should be used to validate the cable model for overvoltage problems. The verification shall be done both in the frequency domain and in the time domain.",

author = "Bak, {Claus Leth} and Gudmundsdottir, {Unnur Stella} and Wiechowski, {Wojciech Tomasz} and Kim S{\o}gaard and Knardrupg{\aa}rd, {Martin Randrup}",

note = "Paper 15 ; International Conference on Power Systems Transients (IPST 2009) ; Conference date: 02-06-2009 Through 06-07-2009",

year = "2009",

language = "English",

booktitle = "Proceedings of the International Conference on Power Systems Transients (IPST 2009)",

}

Measurements for validation of high voltage underground cable modelling. / Bak, Claus Leth; Gudmundsdottir, Unnur Stella; Wiechowski, Wojciech Tomasz et al.
Proceedings of the International Conference on Power Systems Transients (IPST 2009). 2009.

Research output: Contribution to book/anthology/report/conference proceeding › Article in proceeding › Research › peer-review

TY - GEN

T1 - Measurements for validation of high voltage underground cable modelling

AU - Bak, Claus Leth

AU - Gudmundsdottir, Unnur Stella

AU - Wiechowski, Wojciech Tomasz

AU - Søgaard, Kim

AU - Knardrupgård, Martin Randrup

N1 - Paper 15

PY - 2009

Y1 - 2009

N2 - This paper discusses studies concerning cable modelling for long high voltage AC cable lines. In investigating the possibilities of using long cables instead of overhead lines, the simulation results must be trustworthy. Therefore a model validation is of great importance. This paper describes field test setups and measurements on an already installed cable line with several cross bonding points. These measurements are to be used for cable model validation, which are prepared using simulations. The proposed field tests should be used to validate the cable model for overvoltage problems. The verification shall be done both in the frequency domain and in the time domain.

AB - This paper discusses studies concerning cable modelling for long high voltage AC cable lines. In investigating the possibilities of using long cables instead of overhead lines, the simulation results must be trustworthy. Therefore a model validation is of great importance. This paper describes field test setups and measurements on an already installed cable line with several cross bonding points. These measurements are to be used for cable model validation, which are prepared using simulations. The proposed field tests should be used to validate the cable model for overvoltage problems. The verification shall be done both in the frequency domain and in the time domain.

M3 - Article in proceeding

BT - Proceedings of the International Conference on Power Systems Transients (IPST 2009)

T2 - International Conference on Power Systems Transients (IPST 2009)

Y2 - 2 June 2009 through 6 July 2009

ER -

Measurements for validation of high voltage underground cable modelling

Abstract

Conference

Access to Document

AUB Link

Fingerprint

Cite this