MicroVent (part III): Measurement of the draught rate in the occupied zone

Jerome Le Dreau; Per Kvols Heiselberg; Rasmus Lund Jensen

MicroVent (part III): Measurement of the draught rate in the occupied zone

Jerome Le Dreau, Per Kvols Heiselberg, Rasmus Lund Jensen

Research output: Book/Report › Report › Research

Abstract

This study aims at using the InVentilate unit in the cooling case, without heat recovery. It results in a relatively low inlet air temperature. Different solutions have been tested to decrease the risk of draught in the occupied zone:
‐ Using a mixer (2 designs)
‐ Using an inlet grille
‐ Using an inlet cover

Original language	English

Place of Publication	Aalborg
Publisher	Department of Civil Engineering, Aalborg University
Number of pages	38
Publication status	Published - Mar 2015

Series	DCE Contract Reports
Number	171
ISSN	uden issn

AUB Link

Search for the material in Aalborg University Library's search engine

Cite this

@book{46fe035c13a64d4891f4d1852891954e,

title = "MicroVent (part III): Measurement of the draught rate in the occupied zone",

abstract = "This study aims at using the InVentilate unit in the cooling case, without heat recovery. It results in a relatively low inlet air temperature. Different solutions have been tested to decrease the risk of draught in the occupied zone:‐ Using a mixer (2 designs)‐ Using an inlet grille‐ Using an inlet cover",

author = "Dreau, {Jerome Le} and Heiselberg, {Per Kvols} and Jensen, {Rasmus Lund}",

year = "2015",

month = mar,

language = "English",

series = "DCE Contract Reports",

publisher = "Department of Civil Engineering, Aalborg University",

number = "171",

address = "Denmark",

}

TY - RPRT

T1 - MicroVent (part III)

T2 - Measurement of the draught rate in the occupied zone

AU - Dreau, Jerome Le

AU - Heiselberg, Per Kvols

AU - Jensen, Rasmus Lund

PY - 2015/3

Y1 - 2015/3

N2 - This study aims at using the InVentilate unit in the cooling case, without heat recovery. It results in a relatively low inlet air temperature. Different solutions have been tested to decrease the risk of draught in the occupied zone:‐ Using a mixer (2 designs)‐ Using an inlet grille‐ Using an inlet cover

AB - This study aims at using the InVentilate unit in the cooling case, without heat recovery. It results in a relatively low inlet air temperature. Different solutions have been tested to decrease the risk of draught in the occupied zone:‐ Using a mixer (2 designs)‐ Using an inlet grille‐ Using an inlet cover

M3 - Report

T3 - DCE Contract Reports

BT - MicroVent (part III)

PB - Department of Civil Engineering, Aalborg University

CY - Aalborg

ER -

MicroVent (part III): Measurement of the draught rate in the occupied zone

Abstract

AUB Link

Fingerprint

Cite this