Origin of complex impact craters on native oxide coated silicon surfaces

Juha Samela, Kai Nordlund, Vladimir Popok, Eleanor E.B. Campbell

Research output: Contribution to journalJournal articleResearchpeer-review

48 Citations (Scopus)
14 Downloads (Pure)

Abstract

Crater structures induced by impact of keV-energy Ar cluster ions on silicon surfaces are measured with atomic force microscopy. Complex crater structures consisting of a central hillock and outer rim are observed more often on targets covered with a native silicon oxide layer than on targets without the oxide layer. To explain the formation of these complex crater structures, classical molecular dynamics simulations of Ar cluster impacts on oxide coated silicon surfaces, as well as on bulk amorphous silica, amorphous Si, and crystalline Si substrates, are carried out. The diameter of the simulated hillock structures in the silicon oxide layer is in agreement with the experimental results, but the simulations cannot directly explain the height of hillocks and the outer rim structures when the oxide coated silicon substrate is free of defects. However, in simulations of
5 keV/atom Ar12 cluster impacts, transient displacements of the amorphous silicon or silicon oxide substrate surfaces are induced in an approximately 50 nm wide area surrounding the impact point. In silicon oxide, the transient displacements induce small topographical changes on the surface in the vicinity of the central hillock. The comparison of cluster stopping mechanisms in the various silicon oxide and silicon structures shows that the largest lateral momentum is induced in the silicon oxide layer during the impact; thus, the transient displacements on the surface are stronger than in the other substrates. This can be a reason for the higher frequency of occurrence of the complex craters on oxide coated silicon.
Original languageEnglish
Article number075309
JournalPhysical Review B. Condensed Matter and Materials Physics
Volume77
Issue number7
Number of pages15
ISSN1098-0121
DOIs
Publication statusPublished - 11 Feb 2008
Externally publishedYes

Fingerprint

Silicon oxides
Silicon
silicon oxides
craters
Oxides
Substrates
rims
Amorphous silicon
Silicon Dioxide
point impact
Molecular dynamics
Atomic force microscopy
Momentum
simulation
Silica
silicon
Ions
Crystalline materials
stopping
Atoms

Cite this

@article{8e5bd5a2fb3645c794560124631ce47a,
title = "Origin of complex impact craters on native oxide coated silicon surfaces",
abstract = "Crater structures induced by impact of keV-energy Ar cluster ions on silicon surfaces are measured with atomic force microscopy. Complex crater structures consisting of a central hillock and outer rim are observed more often on targets covered with a native silicon oxide layer than on targets without the oxide layer. To explain the formation of these complex crater structures, classical molecular dynamics simulations of Ar cluster impacts on oxide coated silicon surfaces, as well as on bulk amorphous silica, amorphous Si, and crystalline Si substrates, are carried out. The diameter of the simulated hillock structures in the silicon oxide layer is in agreement with the experimental results, but the simulations cannot directly explain the height of hillocks and the outer rim structures when the oxide coated silicon substrate is free of defects. However, in simulations of5 keV/atom Ar12 cluster impacts, transient displacements of the amorphous silicon or silicon oxide substrate surfaces are induced in an approximately 50 nm wide area surrounding the impact point. In silicon oxide, the transient displacements induce small topographical changes on the surface in the vicinity of the central hillock. The comparison of cluster stopping mechanisms in the various silicon oxide and silicon structures shows that the largest lateral momentum is induced in the silicon oxide layer during the impact; thus, the transient displacements on the surface are stronger than in the other substrates. This can be a reason for the higher frequency of occurrence of the complex craters on oxide coated silicon.",
author = "Juha Samela and Kai Nordlund and Vladimir Popok and Campbell, {Eleanor E.B.}",
year = "2008",
month = "2",
day = "11",
doi = "10.1103/PhysRevB.77.075309",
language = "English",
volume = "77",
journal = "Physical Review B",
issn = "2469-9950",
publisher = "American Physical Society",
number = "7",

}

Origin of complex impact craters on native oxide coated silicon surfaces. / Samela, Juha; Nordlund, Kai; Popok, Vladimir; Campbell, Eleanor E.B.

In: Physical Review B. Condensed Matter and Materials Physics, Vol. 77, No. 7, 075309, 11.02.2008.

Research output: Contribution to journalJournal articleResearchpeer-review

TY - JOUR

T1 - Origin of complex impact craters on native oxide coated silicon surfaces

AU - Samela, Juha

AU - Nordlund, Kai

AU - Popok, Vladimir

AU - Campbell, Eleanor E.B.

PY - 2008/2/11

Y1 - 2008/2/11

N2 - Crater structures induced by impact of keV-energy Ar cluster ions on silicon surfaces are measured with atomic force microscopy. Complex crater structures consisting of a central hillock and outer rim are observed more often on targets covered with a native silicon oxide layer than on targets without the oxide layer. To explain the formation of these complex crater structures, classical molecular dynamics simulations of Ar cluster impacts on oxide coated silicon surfaces, as well as on bulk amorphous silica, amorphous Si, and crystalline Si substrates, are carried out. The diameter of the simulated hillock structures in the silicon oxide layer is in agreement with the experimental results, but the simulations cannot directly explain the height of hillocks and the outer rim structures when the oxide coated silicon substrate is free of defects. However, in simulations of5 keV/atom Ar12 cluster impacts, transient displacements of the amorphous silicon or silicon oxide substrate surfaces are induced in an approximately 50 nm wide area surrounding the impact point. In silicon oxide, the transient displacements induce small topographical changes on the surface in the vicinity of the central hillock. The comparison of cluster stopping mechanisms in the various silicon oxide and silicon structures shows that the largest lateral momentum is induced in the silicon oxide layer during the impact; thus, the transient displacements on the surface are stronger than in the other substrates. This can be a reason for the higher frequency of occurrence of the complex craters on oxide coated silicon.

AB - Crater structures induced by impact of keV-energy Ar cluster ions on silicon surfaces are measured with atomic force microscopy. Complex crater structures consisting of a central hillock and outer rim are observed more often on targets covered with a native silicon oxide layer than on targets without the oxide layer. To explain the formation of these complex crater structures, classical molecular dynamics simulations of Ar cluster impacts on oxide coated silicon surfaces, as well as on bulk amorphous silica, amorphous Si, and crystalline Si substrates, are carried out. The diameter of the simulated hillock structures in the silicon oxide layer is in agreement with the experimental results, but the simulations cannot directly explain the height of hillocks and the outer rim structures when the oxide coated silicon substrate is free of defects. However, in simulations of5 keV/atom Ar12 cluster impacts, transient displacements of the amorphous silicon or silicon oxide substrate surfaces are induced in an approximately 50 nm wide area surrounding the impact point. In silicon oxide, the transient displacements induce small topographical changes on the surface in the vicinity of the central hillock. The comparison of cluster stopping mechanisms in the various silicon oxide and silicon structures shows that the largest lateral momentum is induced in the silicon oxide layer during the impact; thus, the transient displacements on the surface are stronger than in the other substrates. This can be a reason for the higher frequency of occurrence of the complex craters on oxide coated silicon.

U2 - 10.1103/PhysRevB.77.075309

DO - 10.1103/PhysRevB.77.075309

M3 - Journal article

VL - 77

JO - Physical Review B

JF - Physical Review B

SN - 2469-9950

IS - 7

M1 - 075309

ER -