Skip to main navigation Skip to search Skip to main content

Solar intensity measurement using a thermoelectric module; experimental study and mathematical modeling

  • Nader Rahbar
  • , Amin Asadi

Research output: Contribution to journal › Journal article › Research › peer-review

Abstract

The present study is intended to design, manufacture, and modeling an inexpensive pyranometer using a thermoelectric module. The governing equations relating the solar intensity, output voltage, and ambient temperature have been derived by applying the mathematical and thermodynamic models. According to the thermodynamics modeling, the output voltage is a function of solar intensity, ambient temperature, internal parameters of thermoelectric module, convection and radiation coefficients, and geometrical characteristics of the setup. Moreover, the solar intensity can be considered as a linear function of voltage and ambient temperature within an acceptable range of accuracy. The experiments have been carried out on a typical winter day under climatic conditions of Semnan (35°33′N, 53°23′E), Iran. The results also indicated that the output voltage is dependent on the solar intensity and its maximum value was 120 mV. Finally, based on the experimental results, two correlations, with the accuracy of 10%, have been proposed to predict the solar intensity as a function of output voltage and ambient temperature. The average values of total heat transfer coefficient and thermal resistance of the heat-sink have been also calculated according to the thermodynamic modeling and experimental results.
Original languageEnglish
JournalEnergy Conversion and Management
Volume129
Pages (from-to)344-353
Number of pages10
ISSN0196-8904
DOIs
Publication statusPublished - Dec 2016
Externally publishedYes

Fingerprint

Dive into the research topics of 'Solar intensity measurement using a thermoelectric module; experimental study and mathematical modeling'. Together they form a unique fingerprint.

Cite this