Abstract

This summary presents the main results when MicroVent is used in the cooling case, without heat recovery. Experiments have thus been performed with relatively low inlet air temperature (below 15°C). Different solutions have been compared to decrease the risk of draught in the occupied zone:

‐ using an inlet grille
‐ using an inlet cover
‐ using a mixer (2 designs)
Original languageEnglish
Place of PublicationAalborg
PublisherDepartment of Civil Engineering, Aalborg University
Number of pages13
Publication statusPublished - Mar 2015
SeriesDCE Contract Reports
Number172
ISSNuden issn

    Fingerprint

Keywords

  • MicroVent
  • Cooling case

Cite this

Dreau, J. L., Heiselberg, P. K., & Jensen, R. L. (2015). Summary of measurements with MicroVent: Investigation of the draught risk in the occupied zone. Department of Civil Engineering, Aalborg University. DCE Contract Reports, No. 172