Towards an Industry-Applicable Design Methodology for Developing Reconfigurable Manufacturing

Alessia Napoleone; Ann-Louise Andersen; Thomas Ditlev Brunø; Kjeld Nielsen; Simon Boldt; Carin  Rösiö; David Grube Hansen

doi:10.1007/978-3-030-57993-7_51

Towards an Industry-Applicable Design Methodology for Developing Reconfigurable Manufacturing

Alessia Napoleone^*, Ann-Louise Andersen, Thomas Ditlev Brunø, Kjeld Nielsen, Simon Boldt, Carin Rösiö, David Grube Hansen

^*Corresponding author for this work

Research output: Contribution to book/anthology/report/conference proceeding › Article in proceeding › Research › peer-review

9 Citations (Scopus)

Abstract

The concept of the Reconfigurable Manufacturing System (RMS) was introduced for the first time almost 20 years ago as a new manufacturing system concept with functionality and capacity being dynamically changeable through modularity, integrability, diagnosability, and customization. Since its introduction, the RMS concept has been extensively researched from various perspectives and new trends are today increasing its relevance. This research revisits the current status of both RMS research - in terms of research domains and trends - and RMS practice - in terms of potentialities and limitations towards broad industry application. Based on this, a design methodology in four steps is proposed and, to ensure its industry-applicability, the existence or lack of tools for each step is summarized as a basis for future research developments.

Original language	English
Title of host publication	Advances in Informaton and Communication Technology : Advances in Production Management Systems (APMS)
Number of pages	8
Volume	591
Publisher	Springer
Publication date	2020
Pages	449-456
ISBN (Print)	978-3-030-57992-0
ISBN (Electronic)	978-3-030-57993-7
DOIs	https://doi.org/10.1007/978-3-030-57993-7_51
Publication status	Published - 2020
Event	IFIP WG 5.7 International Conference, APMS 2020 - Novi Sad, Serbia Duration: 30 Aug 2020 → 3 Sept 2020 https://www.ifipwg57.org/

Conference

Conference	IFIP WG 5.7 International Conference, APMS 2020
Country/Territory	Serbia
City	Novi Sad
Period	30/08/2020 → 03/09/2020
Internet address	https://www.ifipwg57.org/

Series	IFIP Advances in Information and Communication Technology
Volume	591
ISSN	1571-5736

Access to Document

10.1007/978-3-030-57993-7_51

AUB Link

Search for the material in Aalborg University Library's search engine

Cite this

Napoleone, A., Andersen, A-L., Brunø, T. D., Nielsen, K., Boldt, S., Rösiö, C., & Grube Hansen, D. (2020). Towards an Industry-Applicable Design Methodology for Developing Reconfigurable Manufacturing. In Advances in Informaton and Communication Technology: Advances in Production Management Systems (APMS) (Vol. 591, pp. 449-456). Springer. https://doi.org/10.1007/978-3-030-57993-7_51

Napoleone, Alessia ; Andersen, Ann-Louise ; Brunø, Thomas Ditlev et al. / Towards an Industry-Applicable Design Methodology for Developing Reconfigurable Manufacturing. Advances in Informaton and Communication Technology: Advances in Production Management Systems (APMS). Vol. 591 Springer, 2020. pp. 449-456 (IFIP Advances in Information and Communication Technology, Vol. 591).

@inproceedings{dc5cde8baf7a4a778f8b338e0fa17ac9,

title = "Towards an Industry-Applicable Design Methodology for Developing Reconfigurable Manufacturing",

abstract = "The concept of the Reconfigurable Manufacturing System (RMS) was introduced for the first time almost 20 years ago as a new manufacturing system concept with functionality and capacity being dynamically changeable through modularity, integrability, diagnosability, and customization. Since its introduction, the RMS concept has been extensively researched from various perspectives and new trends are today increasing its relevance. This research revisits the current status of both RMS research - in terms of research domains and trends - and RMS practice - in terms of potentialities and limitations towards broad industry application. Based on this, a design methodology in four steps is proposed and, to ensure its industry-applicability, the existence or lack of tools for each step is summarized as a basis for future research developments.",

author = "Alessia Napoleone and Ann-Louise Andersen and Brun{\o}, {Thomas Ditlev} and Kjeld Nielsen and Simon Boldt and Carin R{\"o}si{\"o} and {Grube Hansen}, David",

year = "2020",

doi = "10.1007/978-3-030-57993-7_51",

language = "English",

isbn = "978-3-030-57992-0",

volume = "591",

series = "IFIP Advances in Information and Communication Technology",

publisher = "Springer",

pages = "449--456",

booktitle = "Advances in Informaton and Communication Technology",

address = "Germany",

note = "IFIP WG 5.7 International Conference, APMS 2020 ; Conference date: 30-08-2020 Through 03-09-2020",

url = "https://www.ifipwg57.org/",

}

Napoleone, A, Andersen, A-L , Brunø, TD , Nielsen, K, Boldt, S, Rösiö, C & Grube Hansen, D 2020, Towards an Industry-Applicable Design Methodology for Developing Reconfigurable Manufacturing. in Advances in Informaton and Communication Technology: Advances in Production Management Systems (APMS). vol. 591, Springer, IFIP Advances in Information and Communication Technology, vol. 591, pp. 449-456, IFIP WG 5.7 International Conference, APMS 2020, Novi Sad, Serbia, 30/08/2020. https://doi.org/10.1007/978-3-030-57993-7_51

Towards an Industry-Applicable Design Methodology for Developing Reconfigurable Manufacturing. / Napoleone, Alessia; Andersen, Ann-Louise ; Brunø, Thomas Ditlev et al.
Advances in Informaton and Communication Technology: Advances in Production Management Systems (APMS). Vol. 591 Springer, 2020. p. 449-456 (IFIP Advances in Information and Communication Technology, Vol. 591).

Research output: Contribution to book/anthology/report/conference proceeding › Article in proceeding › Research › peer-review

TY - GEN

T1 - Towards an Industry-Applicable Design Methodology for Developing Reconfigurable Manufacturing

AU - Napoleone, Alessia

AU - Andersen, Ann-Louise

AU - Brunø, Thomas Ditlev

AU - Nielsen, Kjeld

AU - Boldt, Simon

AU - Rösiö, Carin

AU - Grube Hansen, David

PY - 2020

Y1 - 2020

N2 - The concept of the Reconfigurable Manufacturing System (RMS) was introduced for the first time almost 20 years ago as a new manufacturing system concept with functionality and capacity being dynamically changeable through modularity, integrability, diagnosability, and customization. Since its introduction, the RMS concept has been extensively researched from various perspectives and new trends are today increasing its relevance. This research revisits the current status of both RMS research - in terms of research domains and trends - and RMS practice - in terms of potentialities and limitations towards broad industry application. Based on this, a design methodology in four steps is proposed and, to ensure its industry-applicability, the existence or lack of tools for each step is summarized as a basis for future research developments.

AB - The concept of the Reconfigurable Manufacturing System (RMS) was introduced for the first time almost 20 years ago as a new manufacturing system concept with functionality and capacity being dynamically changeable through modularity, integrability, diagnosability, and customization. Since its introduction, the RMS concept has been extensively researched from various perspectives and new trends are today increasing its relevance. This research revisits the current status of both RMS research - in terms of research domains and trends - and RMS practice - in terms of potentialities and limitations towards broad industry application. Based on this, a design methodology in four steps is proposed and, to ensure its industry-applicability, the existence or lack of tools for each step is summarized as a basis for future research developments.

U2 - 10.1007/978-3-030-57993-7_51

DO - 10.1007/978-3-030-57993-7_51

M3 - Article in proceeding

SN - 978-3-030-57992-0

VL - 591

T3 - IFIP Advances in Information and Communication Technology

SP - 449

EP - 456

BT - Advances in Informaton and Communication Technology

PB - Springer

T2 - IFIP WG 5.7 International Conference, APMS 2020

Y2 - 30 August 2020 through 3 September 2020

ER -

Napoleone A, Andersen A-L , Brunø TD , Nielsen K, Boldt S, Rösiö C et al. Towards an Industry-Applicable Design Methodology for Developing Reconfigurable Manufacturing. In Advances in Informaton and Communication Technology: Advances in Production Management Systems (APMS). Vol. 591. Springer. 2020. p. 449-456. (IFIP Advances in Information and Communication Technology, Vol. 591). doi: 10.1007/978-3-030-57993-7_51

Towards an Industry-Applicable Design Methodology for Developing Reconfigurable Manufacturing

Abstract

Conference

Access to Document

AUB Link

Fingerprint

Cite this