Active Thermal Control by Controlled Shoot-through of Power Devices

Alessandro Soldati; Carlo Concari; Davide Barater; Francesco Iannuzzo; Frede Blaabjerg

doi:10.1109/IECON.2017.8216751

Active Thermal Control by Controlled Shoot-through of Power Devices

Alessandro Soldati, Carlo Concari, Davide Barater, Francesco Iannuzzo, Frede Blaabjerg

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

9 Citationer (Scopus)

Abstract

Active Thermal Control (ATC) consists in driving power switches in a less efficient way when low load conditions are present. The resulting wasted power is used to self-heat the device, reducing amplitude and occurrence of thermal cycles and hence improving the reliability. This paper presents a novel way to control losses, and hence temperature, of both positive- and negative-current devices in half-bridge topologies at various load conditions. The goal is achieved by means of a controlled shoot-through of the half-bridge leg.

Originalsprog	Engelsk
Titel	Proceedings of 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017
Antal sider	6
Forlag	IEEE Press
Publikationsdato	okt. 2017
Sider	4363-4368
ISBN (Elektronisk)	978-1-5386-1127-2
DOI	https://doi.org/10.1109/IECON.2017.8216751
Status	Udgivet - okt. 2017
Begivenhed	43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017 - Beijing, Kina Varighed: 29 okt. 2017 → 1 nov. 2017

Konference

Konference	43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017
Land/Område	Kina
By	Beijing
Periode	29/10/2017 → 01/11/2017
Sponsor	Chinese Association of Automation (CAA), Chinese Power Supply Society, et al., IEEE Industrial Electronics Society (IES), Systems Engineering Society of China, The Institute of Electrical and Electronics Engineers (IEEE)

Adgang til dokumentet

10.1109/IECON.2017.8216751

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{b2fee9abdf254238b9de2a512c9cb387,

title = "Active Thermal Control by Controlled Shoot-through of Power Devices",

abstract = "Active Thermal Control (ATC) consists in driving power switches in a less efficient way when low load conditions are present. The resulting wasted power is used to self-heat the device, reducing amplitude and occurrence of thermal cycles and hence improving the reliability. This paper presents a novel way to control losses, and hence temperature, of both positive- and negative-current devices in half-bridge topologies at various load conditions. The goal is achieved by means of a controlled shoot-through of the half-bridge leg.",

author = "Alessandro Soldati and Carlo Concari and Davide Barater and Francesco Iannuzzo and Frede Blaabjerg",

year = "2017",

month = oct,

doi = "10.1109/IECON.2017.8216751",

language = "English",

pages = "4363--4368",

booktitle = "Proceedings of 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017",

publisher = "IEEE Press",

note = "43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017 ; Conference date: 29-10-2017 Through 01-11-2017",

}

Soldati, A, Concari, C, Barater, D, Iannuzzo, F & Blaabjerg, F 2017, Active Thermal Control by Controlled Shoot-through of Power Devices. i Proceedings of 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017. IEEE Press, s. 4363-4368, 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017, Beijing, Kina, 29/10/2017. https://doi.org/10.1109/IECON.2017.8216751

Active Thermal Control by Controlled Shoot-through of Power Devices. / Soldati, Alessandro; Concari, Carlo; Barater, Davide et al.
Proceedings of 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017. IEEE Press, 2017. s. 4363-4368.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Active Thermal Control by Controlled Shoot-through of Power Devices

AU - Soldati, Alessandro

AU - Concari, Carlo

AU - Barater, Davide

AU - Iannuzzo, Francesco

AU - Blaabjerg, Frede

PY - 2017/10

Y1 - 2017/10

N2 - Active Thermal Control (ATC) consists in driving power switches in a less efficient way when low load conditions are present. The resulting wasted power is used to self-heat the device, reducing amplitude and occurrence of thermal cycles and hence improving the reliability. This paper presents a novel way to control losses, and hence temperature, of both positive- and negative-current devices in half-bridge topologies at various load conditions. The goal is achieved by means of a controlled shoot-through of the half-bridge leg.

AB - Active Thermal Control (ATC) consists in driving power switches in a less efficient way when low load conditions are present. The resulting wasted power is used to self-heat the device, reducing amplitude and occurrence of thermal cycles and hence improving the reliability. This paper presents a novel way to control losses, and hence temperature, of both positive- and negative-current devices in half-bridge topologies at various load conditions. The goal is achieved by means of a controlled shoot-through of the half-bridge leg.

U2 - 10.1109/IECON.2017.8216751

DO - 10.1109/IECON.2017.8216751

M3 - Article in proceeding

SP - 4363

EP - 4368

BT - Proceedings of 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017

PB - IEEE Press

T2 - 43rd Annual Conference of the IEEE Industrial Electronics Society, IECON 2017

Y2 - 29 October 2017 through 1 November 2017

ER -

Active Thermal Control by Controlled Shoot-through of Power Devices

Abstract

Konference

Adgang til dokumentet

AUB Link

Fingeraftryk

Citationsformater