TY - JOUR
T1 - Parametric investigation of the enhancing effects of finned tubes on the solidification of PCM
AU - Santos, Felipe S dos
AU - A.R. Ismail, Kamal
AU - A.M. Lino, Fatima
AU - Arabkoohsar, Ahmad
AU - G.S. Lagob, Taynara
PY - 2020/5
Y1 - 2020/5
N2 - This paper presents the results of a study on the enhancement of solidification around finned tubes and the development of correlations to predict their thermal performance. The effects of the geometrical and operational parameters on the solidification process and thermal performance are investigated. A numerical code to predict the solidification around radial finned tubes based on pure conduction and the enthalpy method is developed and validated against experimental results showing good agreement. Results of additional experiments were also used to develop correlations for the interface position, interface velocity and the time for complete solidification. The fin diameter, and low tube wall temperature enhance the interface position and velocity, and reduce the time for complete solidification. Experiments showed that there is an optimum fin diameter for which the solidified phase change material (PCM) and stored energy are the highest. The proposed correlations for the interface position, interface velocity and the time for complete phase change seem to agree well with experimental results within maximum deviation of 4%, 7% and 1.03%, respectively. Hence, the correlations can be used for overall and quick estimates of solidification of PCM around radial finned tubes.
AB - This paper presents the results of a study on the enhancement of solidification around finned tubes and the development of correlations to predict their thermal performance. The effects of the geometrical and operational parameters on the solidification process and thermal performance are investigated. A numerical code to predict the solidification around radial finned tubes based on pure conduction and the enthalpy method is developed and validated against experimental results showing good agreement. Results of additional experiments were also used to develop correlations for the interface position, interface velocity and the time for complete solidification. The fin diameter, and low tube wall temperature enhance the interface position and velocity, and reduce the time for complete solidification. Experiments showed that there is an optimum fin diameter for which the solidified phase change material (PCM) and stored energy are the highest. The proposed correlations for the interface position, interface velocity and the time for complete phase change seem to agree well with experimental results within maximum deviation of 4%, 7% and 1.03%, respectively. Hence, the correlations can be used for overall and quick estimates of solidification of PCM around radial finned tubes.
U2 - 10.1016/j.ijheatmasstransfer.2020.119485
DO - 10.1016/j.ijheatmasstransfer.2020.119485
M3 - Journal article
SN - 0017-9310
VL - 152
JO - International Journal of Heat and Mass Transfer
JF - International Journal of Heat and Mass Transfer
M1 - 119485
ER -