A DSM Clustering Method for Product and Service Modularization

Omar Ezzat; Khaled Medini; Maria Stoettrup Schioenning Larsen; Xavier Boucher; Thomas Ditlev Brunø; Kjeld Nielsen; Xavier Delorme

doi:10.1007/978-3-030-30000-5_47

A DSM Clustering Method for Product and Service Modularization

Omar Ezzat^*, Khaled Medini, Maria Stoettrup Schioenning Larsen, Xavier Boucher, Thomas Ditlev Brunø, Kjeld Nielsen, Xavier Delorme

^*Kontaktforfatter

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

3 Citationer (Scopus)

Abstract

Many manufacturers are in the process of evolving from mass production to mass customization to cope with the increasing diversity of customer requirements. This induces an increasing complexity resulting from the high variety offered to customers. This problem is heightened by integrating product and service within the same offering. Modularity is considered as a driver for reducing complexity while increasing offered variety of products and services. This paper addresses the question of how to modularize products and/or services considering different criteria from the designers and domain experts. To this end, a Design Structure Matrix (DSM) based method is introduced. The method relies on a set of modularization criteria and on clustering to form product and/or service modules. The applicability of the method is illustrated through a test case in the manufacturing sector.

Originalsprog	Engelsk
Titel	Advances in Production Management Systems. Production Management for the Factory of the Future : IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1–5, 2019, Proceedings, Part I
Redaktører	Farhad Ameri, Kathryn E. Stecke, Gregor von Cieminski, Dimitris Kiritsis
Antal sider	8
Vol/bind	1
Forlag	Springer
Publikationsdato	2019
Sider	375-382
ISBN (Trykt)	978-3-030-29999-6
ISBN (Elektronisk)	978-3-030-30000-5
DOI	https://doi.org/10.1007/978-3-030-30000-5_47
Status	Udgivet - 2019
Begivenhed	IFIP WG 5.7 International Conference, APMS 2019 - Hilton Austin, Texas, Austin, TX, USA Varighed: 2 sep. 2019 → 5 sep. 2019 https://www.apms-conference.org

Konference

Konference	IFIP WG 5.7 International Conference, APMS 2019
Lokation	Hilton Austin, Texas
Land/Område	USA
By	Austin, TX
Periode	02/09/2019 → 05/09/2019
Internetadresse	https://www.apms-conference.org

Navn	IFIP AICT - Advances in Information and Communication technology
Vol/bind	566
ISSN	1868-4238

Adgang til dokumentet

10.1007/978-3-030-30000-5_47

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Andre filer og links

http://www.scopus.com/inward/record.url?scp=85072990504&partnerID=8YFLogxK

3 Citationer
1 Konferenceartikel i proceeding
1 Konferenceartikel i tidsskrift

Challenges in developing modular services in manufacturing companies: A multiple case study in Danish manufacturing industry
Larsen, M. S. S., Andersen, A-L., Nielsen, K. & Brunø, T. D., jun. 2019, I: Procedia CIRP. 81, s. 399-404 6 s.
Publikation: Bidrag til tidsskrift › Konferenceartikel i tidsskrift › Forskning › peer review

Åben adgang
Fil
3 Citationer (Scopus)

105 Downloads (Pure)
Process Innovation in Learning Factories: Towards a Reference Model
Larsen, M. S. S., Lassen, A. H. & Nielsen, K., 2019, Advances in Production Management Systems. Production Management for the Factory of the Future: IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1–5, 2019, Proceedings, Part I. Ameri, F., Stecke, K. E., von Cieminski, G. & Kiritsis, D. (red.). Springer Publishing Company, Bind 1. s. 658-665 8 s. (I F I P, Bind 566).
Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review
4 Citationer (Scopus)

Citationsformater

Ezzat, O., Medini, K., Larsen, M. S. S., Boucher, X., Brunø, T. D., Nielsen, K., & Delorme, X. (2019). A DSM Clustering Method for Product and Service Modularization. I F. Ameri, K. E. Stecke, G. von Cieminski, & D. Kiritsis (red.), Advances in Production Management Systems. Production Management for the Factory of the Future: IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1–5, 2019, Proceedings, Part I (Bind 1, s. 375-382). Springer. https://doi.org/10.1007/978-3-030-30000-5_47

Ezzat, Omar ; Medini, Khaled ; Larsen, Maria Stoettrup Schioenning et al. / A DSM Clustering Method for Product and Service Modularization. Advances in Production Management Systems. Production Management for the Factory of the Future: IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1–5, 2019, Proceedings, Part I. red. / Farhad Ameri ; Kathryn E. Stecke ; Gregor von Cieminski ; Dimitris Kiritsis. Bind 1 Springer, 2019. s. 375-382 (IFIP AICT - Advances in Information and Communication technology, Bind 566).

@inproceedings{c367735d46504636956f00bbf6ac2205,

title = "A DSM Clustering Method for Product and Service Modularization",

abstract = "Many manufacturers are in the process of evolving from mass production to mass customization to cope with the increasing diversity of customer requirements. This induces an increasing complexity resulting from the high variety offered to customers. This problem is heightened by integrating product and service within the same offering. Modularity is considered as a driver for reducing complexity while increasing offered variety of products and services. This paper addresses the question of how to modularize products and/or services considering different criteria from the designers and domain experts. To this end, a Design Structure Matrix (DSM) based method is introduced. The method relies on a set of modularization criteria and on clustering to form product and/or service modules. The applicability of the method is illustrated through a test case in the manufacturing sector.",

keywords = "Clustering, Design Structure Matrix, Product modularity, Service modularity, Variety management",

author = "Omar Ezzat and Khaled Medini and Larsen, {Maria Stoettrup Schioenning} and Xavier Boucher and Brun{\o}, {Thomas Ditlev} and Kjeld Nielsen and Xavier Delorme",

year = "2019",

doi = "10.1007/978-3-030-30000-5_47",

language = "English",

isbn = "978-3-030-29999-6",

volume = "1",

series = "IFIP AICT - Advances in Information and Communication technology",

publisher = "Springer",

pages = "375--382",

editor = "Farhad Ameri and Stecke, {Kathryn E.} and {von Cieminski}, Gregor and Dimitris Kiritsis",

booktitle = "Advances in Production Management Systems. Production Management for the Factory of the Future",

address = "Germany",

note = "IFIP WG 5.7 International Conference, APMS 2019, APMS2019 ; Conference date: 02-09-2019 Through 05-09-2019",

url = "https://www.apms-conference.org",

}

Ezzat, O, Medini, K, Larsen, MSS, Boucher, X, Brunø, TD , Nielsen, K & Delorme, X 2019, A DSM Clustering Method for Product and Service Modularization. i F Ameri, KE Stecke, G von Cieminski & D Kiritsis (red), Advances in Production Management Systems. Production Management for the Factory of the Future: IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1–5, 2019, Proceedings, Part I. bind 1, Springer, IFIP AICT - Advances in Information and Communication technology, bind 566, s. 375-382, IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, 02/09/2019. https://doi.org/10.1007/978-3-030-30000-5_47

A DSM Clustering Method for Product and Service Modularization. / Ezzat, Omar; Medini, Khaled; Larsen, Maria Stoettrup Schioenning et al.
Advances in Production Management Systems. Production Management for the Factory of the Future: IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1–5, 2019, Proceedings, Part I. red. / Farhad Ameri; Kathryn E. Stecke; Gregor von Cieminski; Dimitris Kiritsis. Bind 1 Springer, 2019. s. 375-382 (IFIP AICT - Advances in Information and Communication technology, Bind 566).

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - A DSM Clustering Method for Product and Service Modularization

AU - Ezzat, Omar

AU - Medini, Khaled

AU - Larsen, Maria Stoettrup Schioenning

AU - Boucher, Xavier

AU - Brunø, Thomas Ditlev

AU - Nielsen, Kjeld

AU - Delorme, Xavier

PY - 2019

Y1 - 2019

N2 - Many manufacturers are in the process of evolving from mass production to mass customization to cope with the increasing diversity of customer requirements. This induces an increasing complexity resulting from the high variety offered to customers. This problem is heightened by integrating product and service within the same offering. Modularity is considered as a driver for reducing complexity while increasing offered variety of products and services. This paper addresses the question of how to modularize products and/or services considering different criteria from the designers and domain experts. To this end, a Design Structure Matrix (DSM) based method is introduced. The method relies on a set of modularization criteria and on clustering to form product and/or service modules. The applicability of the method is illustrated through a test case in the manufacturing sector.

AB - Many manufacturers are in the process of evolving from mass production to mass customization to cope with the increasing diversity of customer requirements. This induces an increasing complexity resulting from the high variety offered to customers. This problem is heightened by integrating product and service within the same offering. Modularity is considered as a driver for reducing complexity while increasing offered variety of products and services. This paper addresses the question of how to modularize products and/or services considering different criteria from the designers and domain experts. To this end, a Design Structure Matrix (DSM) based method is introduced. The method relies on a set of modularization criteria and on clustering to form product and/or service modules. The applicability of the method is illustrated through a test case in the manufacturing sector.

KW - Clustering

KW - Design Structure Matrix

KW - Product modularity

KW - Service modularity

KW - Variety management

UR - http://www.scopus.com/inward/record.url?scp=85072990504&partnerID=8YFLogxK

U2 - 10.1007/978-3-030-30000-5_47

DO - 10.1007/978-3-030-30000-5_47

M3 - Article in proceeding

SN - 978-3-030-29999-6

VL - 1

T3 - IFIP AICT - Advances in Information and Communication technology

SP - 375

EP - 382

BT - Advances in Production Management Systems. Production Management for the Factory of the Future

A2 - Ameri, Farhad

A2 - Stecke, Kathryn E.

A2 - von Cieminski, Gregor

A2 - Kiritsis, Dimitris

PB - Springer

T2 - IFIP WG 5.7 International Conference, APMS 2019

Y2 - 2 September 2019 through 5 September 2019

ER -

Ezzat O, Medini K, Larsen MSS, Boucher X, Brunø TD , Nielsen K et al. A DSM Clustering Method for Product and Service Modularization. I Ameri F, Stecke KE, von Cieminski G, Kiritsis D, red., Advances in Production Management Systems. Production Management for the Factory of the Future: IFIP WG 5.7 International Conference, APMS 2019, Austin, TX, USA, September 1–5, 2019, Proceedings, Part I. Bind 1. Springer. 2019. s. 375-382. (IFIP AICT - Advances in Information and Communication technology, Bind 566). doi: 10.1007/978-3-030-30000-5_47

A DSM Clustering Method for Product and Service Modularization

Abstract

Konference

Adgang til dokumentet

AUB Link

Andre filer og links

Fingeraftryk

Publikation

Challenges in developing modular services in manufacturing companies: A multiple case study in Danish manufacturing industry

Process Innovation in Learning Factories: Towards a Reference Model

Citationsformater