TY - JOUR
T1 - Investigation of Diagonal Antenna-Chassis Mode in Mobile Terminal LTE MIMO Antennas for Bandwidth Enhancement
AU - Zhang, Shuai
AU - Zhao, Kun
AU - Ying, Zhinong
AU - He, Sailing
PY - 2015/4
Y1 - 2015/4
N2 - A diagonal antenna-chassis mode is investigated in long-term evolution multiple-input-multiple-output (LTE MIMO) antennas. The MIMO bandwidth is defined in this paper as the overlap range of the low-envelope correlation coefficient, high total efficiency, and -6-dB impedance matching bandwidths. Utilizing the diagonal mode analysis, the MIMO bandwidth of the collocated MIMO antennas is improved efficiently at the frequencies of lower than 960 MHz. This is realized through moving the three bandwidths to the same range without the degradation of impedance bandwidth and total efficiency. The physical mechanism of the mismatch of these three bandwidth ranges is also explained. Furthermore, the diagonal antenna-chassis mode is also studied for MIMO elements in the adjacent and diagonal corner locations. As a practical example, a wideband collocated LTE MIMO antenna is proposed and measured. It covers the bands of 740960 and 1700-2700 MHz, where the total efficiencies are better than -3.4 and -1.8 dB, with lower than 0.5 and 0.1, respectively. The measurements agree well with the simulations. Since the proposed method only needs to modify the excitation locations of the MIMO elements on the chassis, this method is valid for different types of symmetrical or asymmetrical MIMO antennas to improve the MIMO bandwidth.
AB - A diagonal antenna-chassis mode is investigated in long-term evolution multiple-input-multiple-output (LTE MIMO) antennas. The MIMO bandwidth is defined in this paper as the overlap range of the low-envelope correlation coefficient, high total efficiency, and -6-dB impedance matching bandwidths. Utilizing the diagonal mode analysis, the MIMO bandwidth of the collocated MIMO antennas is improved efficiently at the frequencies of lower than 960 MHz. This is realized through moving the three bandwidths to the same range without the degradation of impedance bandwidth and total efficiency. The physical mechanism of the mismatch of these three bandwidth ranges is also explained. Furthermore, the diagonal antenna-chassis mode is also studied for MIMO elements in the adjacent and diagonal corner locations. As a practical example, a wideband collocated LTE MIMO antenna is proposed and measured. It covers the bands of 740960 and 1700-2700 MHz, where the total efficiencies are better than -3.4 and -1.8 dB, with lower than 0.5 and 0.1, respectively. The measurements agree well with the simulations. Since the proposed method only needs to modify the excitation locations of the MIMO elements on the chassis, this method is valid for different types of symmetrical or asymmetrical MIMO antennas to improve the MIMO bandwidth.
U2 - 10.1109/MAP.2015.2414751
DO - 10.1109/MAP.2015.2414751
M3 - Journal article
SN - 1045-9243
VL - 57
SP - 217
EP - 228
JO - I E E E Antennas and Propagation Magazine
JF - I E E E Antennas and Propagation Magazine
IS - 2
ER -