Multi-Converter System Modelling in Cost for Reliability Studies

Monika Sandelic; Amirali Davoodi; Ariya Sangwongwanich; Saeed Peyghami; Frede Blaabjerg

doi:10.1109/COMPEL52922.2021.9645998

Multi-Converter System Modelling in Cost for Reliability Studies

Monika Sandelic, Amirali Davoodi, Ariya Sangwongwanich, Saeed Peyghami, Frede Blaabjerg

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

63 Downloads (Pure)

Abstract

Designing a system with a certain level of reliability often impacts its cost. This parameter is even more affected for a system with increased installation rate of failure-prone power electronics. Thus, reliability of converters plays key role in multi-converter system reliability and related economic profitability. In this paper, an economic model considering the power electronics reliability cost and power system reliability cost in planning of multi-converter system is presented. A case study including the impact analysis reveals that a multi-converter system cost excluding the two reliability-related costs can be significantly underestimated during system planning. Thus, the cost studies including the two reliability domains are necessary in order to avoid the non-optimal design of future multi-converter systems.

Originalsprog	Engelsk
Titel	2021 IEEE 22nd Workshop on Control and Modelling of Power Electronics (COMPEL)
Antal sider	8
Forlag	IEEE Press
Publikationsdato	dec. 2021
Sider	1-8
ISBN (Trykt)	978-1-6654-3636-6
ISBN (Elektronisk)	978-1-6654-3635-9
DOI	https://doi.org/10.1109/COMPEL52922.2021.9645998
Status	Udgivet - dec. 2021
Begivenhed	2021 IEEE 22nd Workshop on Control and Modeling for Power Electronics, COMPEL 2021 - Cartagena, Colombia Varighed: 2 nov. 2021 → 5 nov. 2021

Konference

Konference	2021 IEEE 22nd Workshop on Control and Modeling for Power Electronics, COMPEL 2021
Land/Område	Colombia
By	Cartagena
Periode	02/11/2021 → 05/11/2021

Navn	IEEE Workshop on Control and Modeling for Power Electronics (COMPEL)
ISSN	1093-5142

Adgang til dokumentet

10.1109/COMPEL52922.2021.9645998

ManuscriptAccepteret manuskript, 805 KB

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

REPEPS: REliable Power Electronic based Power System
Blaabjerg, F., Iannuzzo, F., Davari, P., Wang, H., Wang, X. & Yang, Y.
01/08/2017 → 01/12/2023
Projekter: Projekt › Forskning

Citationsformater

@inproceedings{4c5e12f9d9c34255aa8af0d73c375517,

title = "Multi-Converter System Modelling in Cost for Reliability Studies",

abstract = "Designing a system with a certain level of reliability often impacts its cost. This parameter is even more affected for a system with increased installation rate of failure-prone power electronics. Thus, reliability of converters plays key role in multi-converter system reliability and related economic profitability. In this paper, an economic model considering the power electronics reliability cost and power system reliability cost in planning of multi-converter system is presented. A case study including the impact analysis reveals that a multi-converter system cost excluding the two reliability-related costs can be significantly underestimated during system planning. Thus, the cost studies including the two reliability domains are necessary in order to avoid the non-optimal design of future multi-converter systems.",

keywords = "Power electronics, Reliability, Cost, Multi-converter systems, Design and planning",

author = "Monika Sandelic and Amirali Davoodi and Ariya Sangwongwanich and Saeed Peyghami and Frede Blaabjerg",

year = "2021",

month = dec,

doi = "10.1109/COMPEL52922.2021.9645998",

language = "English",

isbn = "978-1-6654-3636-6",

series = "IEEE Workshop on Control and Modeling for Power Electronics (COMPEL) ",

publisher = "IEEE Press",

pages = "1--8",

booktitle = "2021 IEEE 22nd Workshop on Control and Modelling of Power Electronics (COMPEL)",

note = "2021 IEEE 22nd Workshop on Control and Modeling for Power Electronics, COMPEL 2021 ; Conference date: 02-11-2021 Through 05-11-2021",

}

Sandelic, M, Davoodi, A, Sangwongwanich, A , Peyghami, S & Blaabjerg, F 2021, Multi-Converter System Modelling in Cost for Reliability Studies. i 2021 IEEE 22nd Workshop on Control and Modelling of Power Electronics (COMPEL). IEEE Press, IEEE Workshop on Control and Modeling for Power Electronics (COMPEL) , s. 1-8, 2021 IEEE 22nd Workshop on Control and Modeling for Power Electronics, COMPEL 2021, Cartagena, Colombia, 02/11/2021. https://doi.org/10.1109/COMPEL52922.2021.9645998

Multi-Converter System Modelling in Cost for Reliability Studies. / Sandelic, Monika; Davoodi, Amirali; Sangwongwanich, Ariya et al.
2021 IEEE 22nd Workshop on Control and Modelling of Power Electronics (COMPEL). IEEE Press, 2021. s. 1-8 (IEEE Workshop on Control and Modeling for Power Electronics (COMPEL) ).

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Multi-Converter System Modelling in Cost for Reliability Studies

AU - Sandelic, Monika

AU - Davoodi, Amirali

AU - Sangwongwanich, Ariya

AU - Peyghami, Saeed

AU - Blaabjerg, Frede

PY - 2021/12

Y1 - 2021/12

N2 - Designing a system with a certain level of reliability often impacts its cost. This parameter is even more affected for a system with increased installation rate of failure-prone power electronics. Thus, reliability of converters plays key role in multi-converter system reliability and related economic profitability. In this paper, an economic model considering the power electronics reliability cost and power system reliability cost in planning of multi-converter system is presented. A case study including the impact analysis reveals that a multi-converter system cost excluding the two reliability-related costs can be significantly underestimated during system planning. Thus, the cost studies including the two reliability domains are necessary in order to avoid the non-optimal design of future multi-converter systems.

AB - Designing a system with a certain level of reliability often impacts its cost. This parameter is even more affected for a system with increased installation rate of failure-prone power electronics. Thus, reliability of converters plays key role in multi-converter system reliability and related economic profitability. In this paper, an economic model considering the power electronics reliability cost and power system reliability cost in planning of multi-converter system is presented. A case study including the impact analysis reveals that a multi-converter system cost excluding the two reliability-related costs can be significantly underestimated during system planning. Thus, the cost studies including the two reliability domains are necessary in order to avoid the non-optimal design of future multi-converter systems.

KW - Power electronics

KW - Reliability

KW - Cost

KW - Multi-converter systems

KW - Design and planning

U2 - 10.1109/COMPEL52922.2021.9645998

DO - 10.1109/COMPEL52922.2021.9645998

M3 - Article in proceeding

SN - 978-1-6654-3636-6

T3 - IEEE Workshop on Control and Modeling for Power Electronics (COMPEL)

SP - 1

EP - 8

BT - 2021 IEEE 22nd Workshop on Control and Modelling of Power Electronics (COMPEL)

PB - IEEE Press

T2 - 2021 IEEE 22nd Workshop on Control and Modeling for Power Electronics, COMPEL 2021

Y2 - 2 November 2021 through 5 November 2021

ER -

Multi-Converter System Modelling in Cost for Reliability Studies

Abstract

Konference

Adgang til dokumentet

AUB Link

Fingeraftryk

Projekter

REPEPS: REliable Power Electronic based Power System

Citationsformater