Analysing DBD plasma lamp intensity versus power consumption using a push-pull pulsed power supply

Pooya Davari; Firuz Zare; Arindam Ghosh

doi:10.1109/EPE.2013.6634416

Analysing DBD plasma lamp intensity versus power consumption using a push-pull pulsed power supply

Pooya Davari, Firuz Zare, Arindam Ghosh

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

10 Citationer (Scopus)

Abstract

In this paper characteristic of a DBD (Dielectric Barrier Discharge) plasma lamp is investigated based on the lamp intensity and power consumption. A pulsed power supply with controllable parameters based on a push-pull converter is developed for lamp excitation at different voltage levels and repetition rate. The experimentations were conducted for 28 different operating points with the frequency range of 2 kHz to 15 kHz at output voltage levels of between 7.4 kVpp up to 13 kVpp. The obtained results show the feasibility of finding an optimum operation point due to nonlinear behaviour of the DBD lamp.

Originalsprog	Engelsk
Titel	Proceedings of the 15th European Conference on Power Electronics and Applications (EPE 2013)
Antal sider	8
Forlag	IEEE Press
Publikationsdato	2013
DOI	https://doi.org/10.1109/EPE.2013.6634416
Status	Udgivet - 2013
Udgivet eksternt	Ja

Adgang til dokumentet

10.1109/EPE.2013.6634416

AUB Link

Søg efter materialet i Aalborg Universitetsbiblioteks søgemaskine

Citationsformater

@inproceedings{89dac508a899450cbbb70effd2fa618b,

title = "Analysing DBD plasma lamp intensity versus power consumption using a push-pull pulsed power supply",

abstract = "In this paper characteristic of a DBD (Dielectric Barrier Discharge) plasma lamp is investigated based on the lamp intensity and power consumption. A pulsed power supply with controllable parameters based on a push-pull converter is developed for lamp excitation at different voltage levels and repetition rate. The experimentations were conducted for 28 different operating points with the frequency range of 2 kHz to 15 kHz at output voltage levels of between 7.4 kVpp up to 13 kVpp. The obtained results show the feasibility of finding an optimum operation point due to nonlinear behaviour of the DBD lamp.",

keywords = "Pulsed power supply, Plasma, DBD lamp, High voltage pulse",

author = "Pooya Davari and Firuz Zare and Arindam Ghosh",

year = "2013",

doi = "10.1109/EPE.2013.6634416",

language = "English",

booktitle = "Proceedings of the 15th European Conference on Power Electronics and Applications (EPE 2013)",

publisher = "IEEE Press",

}

Analysing DBD plasma lamp intensity versus power consumption using a push-pull pulsed power supply. / Davari, Pooya; Zare, Firuz; Ghosh, Arindam.
Proceedings of the 15th European Conference on Power Electronics and Applications (EPE 2013). IEEE Press, 2013.

Publikation: Bidrag til bog/antologi/rapport/konference proceeding › Konferenceartikel i proceeding › Forskning › peer review

TY - GEN

T1 - Analysing DBD plasma lamp intensity versus power consumption using a push-pull pulsed power supply

AU - Davari, Pooya

AU - Zare, Firuz

AU - Ghosh, Arindam

PY - 2013

Y1 - 2013

N2 - In this paper characteristic of a DBD (Dielectric Barrier Discharge) plasma lamp is investigated based on the lamp intensity and power consumption. A pulsed power supply with controllable parameters based on a push-pull converter is developed for lamp excitation at different voltage levels and repetition rate. The experimentations were conducted for 28 different operating points with the frequency range of 2 kHz to 15 kHz at output voltage levels of between 7.4 kVpp up to 13 kVpp. The obtained results show the feasibility of finding an optimum operation point due to nonlinear behaviour of the DBD lamp.

AB - In this paper characteristic of a DBD (Dielectric Barrier Discharge) plasma lamp is investigated based on the lamp intensity and power consumption. A pulsed power supply with controllable parameters based on a push-pull converter is developed for lamp excitation at different voltage levels and repetition rate. The experimentations were conducted for 28 different operating points with the frequency range of 2 kHz to 15 kHz at output voltage levels of between 7.4 kVpp up to 13 kVpp. The obtained results show the feasibility of finding an optimum operation point due to nonlinear behaviour of the DBD lamp.

KW - Pulsed power supply

KW - Plasma

KW - DBD lamp

KW - High voltage pulse

U2 - 10.1109/EPE.2013.6634416

DO - 10.1109/EPE.2013.6634416

M3 - Article in proceeding

BT - Proceedings of the 15th European Conference on Power Electronics and Applications (EPE 2013)

PB - IEEE Press

ER -

Analysing DBD plasma lamp intensity versus power consumption using a push-pull pulsed power supply

Abstract

Adgang til dokumentet

AUB Link

Fingeraftryk

Citationsformater