Impact of bending speed and setup on flex cracks in multilayer ceramic capacitors

Caroline Andersson; Ole  Kristensen; Elise Varescon; Francesco Iannuzzo

doi:10.1109/DEMPED.2017.8062417

Impact of bending speed and setup on flex cracks in multilayer ceramic capacitors

Caroline Andersson, Ole Kristensen, Elise Varescon, Francesco Iannuzzo

Research output: Contribution to book/anthology/report/conference proceeding › Article in proceeding › Research › peer-review

2 Citations (Scopus)

Abstract

A comparison of bending speed and experimental setups using 3-point or 4-point bending for introduction of flex cracks into multilayer ceramic capacitors (MLCCs) in a controlled manner is presented. The impact of bending speed and corresponding strain rates on the formed flex cracks detected by X-ray imaging and optical microscopy images of cross-sectioned MLCCs are examined. Furthermore, the critical strain levels of cracked MLCCs mounted in different orientations as compared to the applied strain are compared for quick and standard bending as well as for a 3-point and 4-point bending test setup.

Original language	English
Title of host publication	Proceedings of 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED)
Publisher	IEEE Press
Publication date	Aug 2017
ISBN (Electronic)	978-1-5090-0409-6
DOIs	https://doi.org/10.1109/DEMPED.2017.8062417
Publication status	Published - Aug 2017
Event	2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) - Tinos, Greece Duration: 29 Aug 2017 → 1 Sept 2017

Conference

Conference	2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED)
Country/Territory	Greece
City	Tinos
Period	29/08/2017 → 01/09/2017

Keywords

Capacitors
Ceramics
Displacement measurement
Fault diagnosis
Fault location
Materials reliability
Microscopy
Strain measurement
X-ray detection

Access to Document

10.1109/DEMPED.2017.8062417

AUB Link

Search for the material in Aalborg University Library's search engine

Cite this

@inproceedings{bc10c4acb7e543f7b5995e677b8b3603,

title = "Impact of bending speed and setup on flex cracks in multilayer ceramic capacitors",

abstract = "A comparison of bending speed and experimental setups using 3-point or 4-point bending for introduction of flex cracks into multilayer ceramic capacitors (MLCCs) in a controlled manner is presented. The impact of bending speed and corresponding strain rates on the formed flex cracks detected by X-ray imaging and optical microscopy images of cross-sectioned MLCCs are examined. Furthermore, the critical strain levels of cracked MLCCs mounted in different orientations as compared to the applied strain are compared for quick and standard bending as well as for a 3-point and 4-point bending test setup.",

keywords = "Capacitors, Ceramics, Displacement measurement, Fault diagnosis, Fault location, Materials reliability, Microscopy, Strain measurement, X-ray detection",

author = "Caroline Andersson and Ole Kristensen and Elise Varescon and Francesco Iannuzzo",

year = "2017",

month = aug,

doi = "10.1109/DEMPED.2017.8062417",

language = "English",

booktitle = "Proceedings of 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED)",

publisher = "IEEE Press",

note = "2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED) ; Conference date: 29-08-2017 Through 01-09-2017",

}

Andersson, C, Kristensen, O, Varescon, E & Iannuzzo, F 2017, Impact of bending speed and setup on flex cracks in multilayer ceramic capacitors. in Proceedings of 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED). IEEE Press, 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED), Tinos, Greece, 29/08/2017. https://doi.org/10.1109/DEMPED.2017.8062417

Impact of bending speed and setup on flex cracks in multilayer ceramic capacitors. / Andersson, Caroline; Kristensen, Ole ; Varescon, Elise et al.
Proceedings of 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED). IEEE Press, 2017.

Research output: Contribution to book/anthology/report/conference proceeding › Article in proceeding › Research › peer-review

TY - GEN

T1 - Impact of bending speed and setup on flex cracks in multilayer ceramic capacitors

AU - Andersson, Caroline

AU - Kristensen, Ole

AU - Varescon, Elise

AU - Iannuzzo, Francesco

PY - 2017/8

Y1 - 2017/8

N2 - A comparison of bending speed and experimental setups using 3-point or 4-point bending for introduction of flex cracks into multilayer ceramic capacitors (MLCCs) in a controlled manner is presented. The impact of bending speed and corresponding strain rates on the formed flex cracks detected by X-ray imaging and optical microscopy images of cross-sectioned MLCCs are examined. Furthermore, the critical strain levels of cracked MLCCs mounted in different orientations as compared to the applied strain are compared for quick and standard bending as well as for a 3-point and 4-point bending test setup.

AB - A comparison of bending speed and experimental setups using 3-point or 4-point bending for introduction of flex cracks into multilayer ceramic capacitors (MLCCs) in a controlled manner is presented. The impact of bending speed and corresponding strain rates on the formed flex cracks detected by X-ray imaging and optical microscopy images of cross-sectioned MLCCs are examined. Furthermore, the critical strain levels of cracked MLCCs mounted in different orientations as compared to the applied strain are compared for quick and standard bending as well as for a 3-point and 4-point bending test setup.

KW - Capacitors

KW - Ceramics

KW - Displacement measurement

KW - Fault diagnosis

KW - Fault location

KW - Materials reliability

KW - Microscopy

KW - Strain measurement

KW - X-ray detection

U2 - 10.1109/DEMPED.2017.8062417

DO - 10.1109/DEMPED.2017.8062417

M3 - Article in proceeding

BT - Proceedings of 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED)

PB - IEEE Press

T2 - 2017 IEEE 11th International Symposium on Diagnostics for Electrical Machines, Power Electronics and Drives (SDEMPED)

Y2 - 29 August 2017 through 1 September 2017

ER -

Impact of bending speed and setup on flex cracks in multilayer ceramic capacitors

Abstract

Conference

Keywords

Access to Document

AUB Link

Fingerprint

Cite this