4E Analysis and Optimization of a Novel Hybrid Biomass-Solar System: Focusing on Peak Load Management and Environmental Emissions

Renewable energies are available as clean sources to replace fossil fuels. Providing continuous power without compromising the environment through hybridizing solar and biomass source is one of the promising solutions. This paper seeks to address thermodynamic, economic, and environmental analysis of a multi-generation system with the aim of supplying heating, cooling, electricity, fresh-water, and hydrogen. To do this, the considered system is divided into on-peak, mid-peak, and off-peak periods and modeled based on the consumption pattern at different hours of the day and night. Due to the availability of renewable energy during peak consumption periods, biomass, solar, and hybrid biomass-solar energies are used as energy sources. This leads to a reduction in biomass consumption and carbon dioxide emissions through storing approximately 10 tons of biomass during the day. A sensitivity analysis of the factors affecting the system’s function indicated that a growth in solar radiation from 600 to 1000 W/m2, results in a 35% improvement in exergy efficiency, a 2.7% raise in the total cost rate, and a 32.4% drop in CO2 emissions of the system. Moreover, by changing the biomass flow rate from 0.5 to 1.5 kg/s, the exergy efficiency and total cost rate improved by 9.28%, 1.3%, respectively, and the CO2 emissions rate increased from 0.41 to 1.14 tons/MWh. In addition, focusing on addressing economic and environmental concerns, the optimization of the proposed hybrid system is performed in two categories of objective functions. In the second category optimization, exergy efficiency, fresh water production, total cost rate and CO2 emissions are determined as 31.75%, 74.75 kg/s, 324.60 $/h and 3.55 tons/MWh, respectively.