Abstract
In this work, a new type of H2S sensor was fabricated by means of drop-coating of an Au/SnO-SnO2 nanosheet material, which was prepared by a one-pot hydrothermal reaction, onto a gold electrode in an alumina ceramic tube with the formation of a thin nanocomposite film. The microstructure and morphology of the nanosheet composites were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). A gas-sensitivity study presented good H2S-sensing performance of such Au/SnO-SnO2 nanosheet composites. At an optimal operating temperature of 240 °C and ambient temperature of 25 °C, the resulting sensor showed a good linear response to H2S in a range of 1.0 to 100 ppm with a low detection limit of 0.7 ppm, and a very fast response-recovery time of 22 s for response and 63 s for recovery, respectively. The sensor was also unaffected by ambient humidity and had good reproducibility and selectivity. When being applied to the monitoring of H2S in an atmospheric environment in a pig farm, the response signal to H2S was only attenuated by 4.69% within 90 days, proving that the sensor had a long and stable service lifetime for continuous running and showing its important practical application prospects.
Originalsprog | Engelsk |
---|---|
Tidsskrift | Analytical Methods |
Vol/bind | 15 |
Sider (fra-til) | 1315-1322 |
Antal sider | 8 |
ISSN | 1759-9660 |
DOI | |
Status | Udgivet - 9 mar. 2023 |
Bibliografisk note
Publisher Copyright:© 2023 The Royal Society of Chemistry.