Projekter pr. år
Abstract
The objective of the workshop was a comparison between the prototype and the laboratory measurements. the emphasis is put on comparison between recorded run-up levels. Three enclosed reports present measurements and results from University of Ghent (UG)/ FCCD, Flanders Hydraulics (FH) and Aalborg University, respectively. These three reports have served as basis for the comparisons carried out during the workshop.
Originalsprog | Engelsk |
---|
Udgivelsessted | Aalborg |
---|---|
Forlag | Hydraulics & Coastal Engineering Laboratory, Department of Civil Engineering, Aalborg University |
Antal sider | 31 |
Status | Udgivet - 1999 |
Bibliografisk note
PDF for print: 100 pp.MAST III; MAS3-CT97-0116
Note vedr. afhandling
If you experience problems with viewing the PDF: Instead of opening it in the browser, right-click on the link and choose "save link-destination as" (or similar) in the menuEmneord
- Breakwaters
- Run-Up
- Wave Run-Up
- Run-Up Signals
- 2D Tests
- 3D Tests
- Tests
- Water Tongue
- Sea State Parameters
Fingeraftryk
Dyk ned i forskningsemnerne om 'Bremen Workshop : Run-Up: comparison between prototype measurements and laboratory measurements'. Sammen danner de et unikt fingeraftryk.Projekter
- 1 Afsluttet
-
OPTICREST: The Optimisation of Crest Level Design of Sloping Coastal Structures through Prototype Monitoring and Modelling
01/01/1998 → 31/12/2001
Projekter: Projekt › Forskning